Eschlböck Biber 60 ZK wood chipper
Grimma
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 172 43...
Show
+49 172 4377651
+49 5127 9...
Show
+49 5127 980733
+49 39291 4...
Show
+49 39291 469711
Germany 
Number: 300127715
Motormarke: > Own hydraulic circuit with
Preis: Price on Application
Illumination
Air Brakes
Load Sensing
BIBER 60 ZK
Eschlböck chopper
with sieve 3 cm
Biber 60 ZK for crane loading with crane
Epsilon C50F 86
> Chipping system: drum chipper
> Wood diameter up to 40 cm
> Feed opening 40 x 70 cm
> Long infeed chain conveyor (2 m)
> Feeding from the side
> Chipping drum with 10 pairs of
staggered chipper blades
> Counter blade (three-part) can be used twice
usable
> Drum diameter: 648 mm
> Easily exchangeable sieves: 3 or 5 cm
Chopping length
> Series incl. 1 sieve
installed for
desired chopping length
> Discharge: auger discharge incl
Scraper system
Blower diameter approx. 1270 mm
hydraulic tank with level and temperature
level and temperature indicator for hydraulic oil
> Reinforced hydraulic drive
Feed supported by gearbox
> Control panel for all functions
pluggable on the machine
with
with cable remote control
can be mounted in the tractor cab
> Infeed conveyor and rocker
electro-hydraulically operated
> Smart-Control for controlling the
feed speed incl. visualization
visualization
Operator-guided control
adjustable chopping length
adjustable chopping length and automatic overload (no
stress)
incl. operating hours counter (daily and
total operating hours)
> Discharge arch can be raised hydraulically
and can be folded down
continuously rotatable through 240
rotatable
With adjustable discharge flap
> Raise and lower feed trough
> Drive: via the PTO shaft (from approx. 80
kW to max. 150 kW)
> PTO shaft speed 1000 rpm
> V-belt transmission for SPC belts
> PTO shaft with overload and
freewheel clutch
> Drive axle incl. lighting
top or bottom hitch
top or bottom
> Paint finish: RAL 3020 traffic red
Crane Epsilon C50F86
> Reach max. 8.60 m
> Net load moment 54 kNm
> Net slewing moment 18 kNm
> with folding crane feed trough
> Single axle 40 km/h or 60 km/h incl
2-circuit air brake
> Automatic trailer coupling for
air braked
2-axle trailer up to 8 t GG
> Crane with support
> incl. 4-finger grapple HSP 020BIO HD
and rotator
> Danfoss control block with electr
joystick
Prof 1 actuation
6
proportional and 2
black/white functions for hydraulic
support legs (cable remote control)
> 2x LED headlights
> Oil supply to the crane from the tractor
Minimum oil requirement 120 l /min
> Load-sensing control from the tractor
required
> Weight approx. 8230 kg
Splitting beaver for beaver 60